Art HQ 231 Spécifications Page 40

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 56
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 39
40 artproaudio.com
MICRO MIXERS
T
he SPLITMix4 is a fully passive hybrid mixer that offers a wide variety of
configur
ations. Mix 4 stereo input channels down to 1 stereo output, split
a stereo input signal to distribute 4 stereo output channels, or combine the
configurations for a wide range of applications. You can even configure the
SPLITMix4 as 4 stereo input channels thru 4 independent level attenuators
to 4 stereo output channels.
Independent stereo level controls are provided on each channel. All 1/4-inch
connections are stereo TRS (Tip, Ring, Sleeve) and all channel connections
have intelligent switching to allow for a wide variety of configurations.
Plugging into a mix input channel removes it from the splitter bus, and
plugging into a splitter output channel removes it from the mix bus. Stereo
or mono operation is determined by the type of 1/4-inch plug and cabling
that you use.
The fully passive design of the SPLITMix4 has no active circuitry to add noise
or distortion, and virtually any signal level can be handled. The Level
attenuators cover a wide range and offer over 90dB of attenuation and
channel isolation. The SPLITMix4 is designed primarily as a line level device
with medium input and output impedances.
FEATURES
Four Stereo Input Channels
Stereo Output
Independent Stereo Level Controls are Provided on
each Channel
Passive Design (No Power Supply Required)
Over 90dB of Attenuation
Pr
oblem:
How do you connect a CD player
,
a synthesizer and the
line output from a bass amp to a recording device?
Solution: Use a simple stereo mixer. The PowerMIX III can accept
either mono or stereo signals and mixes them down to stereo or
identical L/R mono signals
.
Additionally, the PowerMIX III provides a headphone output with its
own level control.
The PowerMIX III is a three-channel true stereo line mixer. Each channel
features a level and pan (“balance”) control. It accepts either mono or
stereo signals, and mixes them down into stereo or identical L/R mono
signals. The PowerMIX III has an added master level control which
controls output volume
,
and headphone level adjusts the level of the
two headphone outputs.
PowerPower
MIX IIIIII
Four Channel Personal Stereo Mixer
FEATURES
Three Input Channels each with Their Own Pan and Level Controls
Three Sets of 1/4-inch Left and Right Unbalanced Inputs
The Left Inputs May be Used for Mono Signals
A Master Level Control Regulates all Three Channels
Left and Right Unbalanced 1/4-inch Outputs
The Headphone Channel Features Dual, Stereo 1/4-inch Outputs
so That Two Headsets can be Connected at Once
The Headphone Level Control Adjusts Both Outputs
Passive Four Channel Stereo / Mono Mixer / Splitter
Vue de la page 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 55 56

Commentaires sur ces manuels

Pas de commentaire